Industrial automation · Emerging markets

Prosperity
starts on
the factory
floor.

The tools to industrialise the world exist.
Now they're affordable.

Adura is an AI-powered PLC built for engineers who know their machines...not just PLC programmers. Describe your process. Adura writes the ladder logic, checks the interlocks, and runs it.

$150per node
10×below market
0PLC programmers needed
Adura Copilot

Process description

When the start button is pressed and the tank level is above the low sensor, run the pump motor. Stop if the high level sensor trips or the e-stop is pressed.

Ladder Diagram

Rung 1 — E-stop interlock
e_stop_ncsafety_ok
Rung 2 — Pump start logic
start_btnlevel_low_oksafety_oklevel_highpump_motor
IEC 61131-3 · LDInterlocks verified

The problem

80% of the world's manufacturing
can't afford to automate.

In Nigeria, Ghana, Kenya, India, Vietnam, and dozens of other high-growth markets, tens of thousands of small factories run on manual labour and ageing machines — not because automation is unwanted, but because three compounding barriers make it impossible.

01Cost
$3,000 – $15,000
typical entry cost

Priced out before they start.

A branded PLC system with HMI, sensors, and wiring costs more than most small factories spend on machinery in a year. The hardware exists to do this for a fraction of that. It just wasn't designed for this customer.

  • Licensed software on top of hardware cost
  • Foreign integrators billing in dollars
  • Annual maintenance contracts with no exit
02Expertise
Near zero
local certified PLC programmers

The knowledge doesn't exist locally.

IEC 61131-3 certification is concentrated in Europe and North America. In Nigeria, Ghana, Vietnam, or Indonesia, a factory owner who wants automation has one option: fly someone in. Most don't bother.

  • Ladder logic requires specialist training
  • No local support when something breaks
  • Dependency on foreign integrators indefinitely
03ROI
None
viable path to return on investment

The numbers never work out.

When the upfront cost is $15,000 and the nearest programmer is a flight away, small manufacturers stagnate. Machines that could double output with basic automation instead run manually — not because the owner doesn't want to automate, but because the ROI path doesn't exist.

  • Payback period measured in decades, not months
  • No incremental adoption — all or nothing
  • Risk concentrated in a single foreign vendor

The tools exist. The demand exists. The missing piece was an interface layer between a process expert and a running automation program. That layer is now possible.

80%of world manufacturing
sits outside the Fortune 500